Alpha A2214 Combo Crown & Drive for 30mm Motors

The Alpha A2214 Combo is part of Alpha Motors’ range of crowns and drives for 30mm tubular motors.

Crowns and drives provide the mechanical interface between a tubular motor and the roller tube surrounding it. Correctly matched components allow the motor’s rotation to be transferred to the roller tube so the blind can operate.

Alpha identifies this particular product as the A2214 Combo and categorises it within its range for 30mm motors.

Designed for Alpha 30mm Motors

The Alpha A2214 Combo is intended for compatible installations using Alpha’s 30mm tubular motor range.

Because tubular motors are installed inside the roller tube, additional components are required to correctly interface the motor with the tube.

The crown and drive perform this important mechanical role.

Matching Your Existing Roller Tube

Crown and drive selection isn’t based solely on motor diameter.

The dimensions and internal profile of the roller tube must also correspond with the components being installed.

If you’re replacing a motor in an existing blind, measure the roller tube and photograph its internal profile before ordering.

Our Match Your Existing Blind Tube to the Correct Crown & Drive guide shows what measurements and photographs to provide.

Replacing Existing Components

If your existing blind already contains a tubular motor, retain the original crown and drive when removing the motor.

Existing components can provide valuable information when matching replacement parts.

Useful information includes the shape of the components, their dimensions and any identifying codes or markings.

Combining this information with a photograph and measurement of the roller tube makes it easier to determine the appropriate replacement components.

Why the Correct Crown & Drive Matters

The drive transfers rotational force from the motor to the roller tube.

The crown forms another part of the interface between the motor and tube.

These components therefore need to correctly correspond with the particular motor and tube configuration.

Even components designed for motors of the same diameter shouldn’t automatically be assumed to fit the same roller tube.

A2214 Combo Compatibility

Alpha’s supplied information identifies the A2214 Combo as a Crown & Drive product for 30mm Motors.

However, Alpha hasn’t provided a specific roller tube profile or tube dimension in the information supplied for this item.

We therefore won’t claim compatibility with a particular tube until that information is confirmed.

For customers who already know that their system requires an A2214 Combo, the product code provides a straightforward replacement reference.

For customers who don’t know their existing components, the tube matching guide provides the better path.

Key Features

• Genuine Alpha motor accessory
• Product Code: A2214 Combo
• Crown & drive combination
• Designed for compatible Alpha 30mm motors
• Part of Alpha’s 30mm Crown & Drive range
• For compatible tubular motor and roller tube installations
• Suitable for compatible replacement and new motor installations

Specifications

Brand: Alpha Motors
Model: A2214 Combo
Product Code: A2214 Combo
Product Type: Crown & Drive Combo
Motor Range: 30mm Alpha Motors
Category: Crowns & Drives for 30mm Motors
Special Care: N/A
Warranty: N/A

Important Compatibility Information

Alpha identifies the A2214 Combo as a Crown & Drive product for 30mm motors, but the supplied information doesn’t specify its corresponding roller tube profile.

Compatibility should therefore be confirmed before ordering unless you already know that your installation requires the A2214 Combo.

Not sure which one fits? Use our Match Your Existing Blind Tube to the Correct Crown & Drive guide.

FAQs

What is the Alpha A2214 Combo?

The A2214 Combo is a crown and drive product from Alpha’s range for 30mm tubular motors.

What size motors is the A2214 Combo designed for?

Alpha categorises it within its Crowns & Drives for 30mm Motors range.

Which roller tube does the A2214 Combo fit?

The supplied Alpha information doesn’t specify a particular tube profile, so compatibility should be confirmed before ordering.

How can I check whether it matches my existing blind?

Measure the existing roller tube and provide a clear photograph showing its internal profile.

Should I keep my existing crown and drive when replacing a motor?

Yes. Existing components can provide useful information when determining the correct replacements.

Are all 30mm motor crowns and drives interchangeable?

No. The crown and drive must also match the roller tube configuration.

What is the product code?

Alpha lists the product code as A2214 Combo.